Sliding Gate Motors
FAAC 740 230v Electric Sliding Gate Motor
1556-0001
The FAAC 740 230V gearmotor for sliding gates with max. weight of 450Kg
Available with OR without an encoder for reversal.
• Quick and easy installation thanks to the built-in, pre-wired control unit
• Anti-crushing protection is ensured by an electronic device directly controlling drive torque
• As the gearmotor is non reversing, no electric locks need be installed
• In the event of power failure, the rotation release device –
protected by key – makes it possible to open and close the gate manually
• Has an Advanced 740D Control Board
• Simplified “on display” programming
• Global Access recommend the use of a range increasing antenna to improve transmitter signal strength!
Model Variants Available:
• 740 Slider, WITH ENCODER for Reversal
Z16 Pinion - 450kg Max. Weight - 230v - 40 Cycles per hour - 200mm/sec
1x Receiver, 2x Long Range Hand Transmitters, Advanced 740D Control Board with Encoder for Reversal
• 740 Slider, WITHOUT ENCODER
Z16 Pinion - 450kg Max. Weight - 230v - 30 Cycles per hour - 200mm/sec
1x Receiver, 2x Long Range Hand Transmitters, Advanced 740D Control Board
Optional Accessories:
• Optional Encoder for Obstacle Detection
• UPS 230V Professional Series with 100Ah Battery
Spare Parts:
• FAAC 740 Magnetic Limit Switch Reader
• FAAC 740 Magnetic Limit Switch Stops
Product Variations
Product Information
Product Specifications
Country of Origin:
EUROPE
Dimensions:
295mm L x 221mm D x 322mm H
Important Notes:
Important Notes: We recommend the use of devices such as Photo Beams as a minimum safety option to reduce the chance of injury to persons and damage to vehicles
IP Rating:
IP44
Recommended Maximum Gate Weight:
400Kg
Motor Volts:
230v
Duty Cycle:
30% Duty Cycle
Pinion Size:
Z16
Height to top of pinion:
79mm
Power Consumption:
350W 1.5A
Power Supply:
230V
Thrust:
350N
Torque:
Max. 18Nm
Usage:
RESIDENTIAL
Opening Speed:
200mm/sec
Closing Speed:
200mm/sec
Product Weight:
10Kg
Product Downloads
Related Products
Tags
Disclaimer
A fee will be charged for the additional customisation or preparation of operators and/or accessories at the time of order.
Prices shown are ex-GST and Plus Freight, you must add GST & Freight to applicable orders.
Global Access advises that all automation systems should have the appropriate safety devices to protect pedestrians and vehicles.
This is mandatory for some operators, this is listed in the notes for the applicable products.
Pricing DisclaimerProduct information and pricing is presented in good faith and believed to be correct at the time of publication, Global Access makes no representations or warranties as to the completeness or accuracy of the information.
Where a product is listed at an incorrect price due to typographical, photographic, or technical error, Global Access shall have the right to refuse or cancel any orders placed for product listed at the incorrect price. Global Access has no liability for any errors or omissions for the content on this website.