Sliding Gate Motors
FAAC 844C 230v Electric Sliding Gate Motor
1516-0003
The FAAC 844 oil-bath gearmotor are perfect for sliding gates up to 1800Kg, with correctly chosen Z16 pinion fitted.
- Electronic Anti-crushing safety
- Magnetic limit switches
- As the gearmotor is non reversing, no electric locks need be installed
- In the event of power failure, the key-operated release device makes it possible to open and close the gate manually
- Twin-disk clutch in oil-bath
- Inductive or magnetic travel limit (according to model)
- Chain driven motor option available
- Global Access recommend the use of a range increasing antenna to improve transmitter signal strength!
Height to top of Pinion: Z16 = 110mm / Z20 = 118mm
Model Variants Available:
• 1516-0003 - 844 Slider - Z16 Pinion
- 1800kg Max. Weight - 230v - 70 Cycles per hour - 160mm/sec 780D Control Board, Electronic and Encoder Anti-Crushing Protection
• 1516-0006 - 844 Slider - Z20 Pinion
- 1000kg Max. Weight - 230v - 70 Cycles per hour - 200mm/sec 780D Control Board, Electronic and Encoder Anti-Crushing Protection
• 1516-0005 - 844 Chain Driven Slider - with Z20 Chain Pinion [SPECIAL ORDER]
- 1000kg Max. Weight - 230v - 70 Cycles per hour - 200mm/sec
• 1516-0004 - 844 Chain Driven Slider - with Z16 Chain Pinion [SPECIAL ORDER]
- 1800kg Max. Weight - 230v - 70 Cycles per hour - 200mm/sec
IMPORTANT NOTES
• Kits do not contain radio gear or remotes
• Optional Foundation/Base Plate available: 6049-0164
• Optional 240V Professional Series UPS
• *Chain Drive 844 uses; 8B gauge chain (NOT INCLUDED IN THIS KIT)
• *Encoder kit available for chain driven operator, to be bought as an optional extra
Product Variations
Product Information
Product Specifications
Country of Origin:
EUROPEz
Important Notes:
Important Notes: We recommend the use of devices such as Photo Beams as a minimum safety option to reduce the chance of injury to persons and damage to vehicles
Recommended Maximum Gate Weight:
Z16 = 1800Kg | Z20 = 1000
Duty Cycle:
Z16 = 50% Duty Cycle | Z20 = 70% Duty Cycle
Pinion Size:
Z28 | Z16
Height to top of pinion:
123mm (Z28) | 118mm (Z16)
Power Supply:
230v
Usage:
RESIDENTIAL | APARTMENT | COMMERCIAL
Weight Capacity:
1,800kg (Z16 Pinion)
Opening Speed:
Z16 = 160mm/sec Z20 = 200mm/sec
Closing Speed:
Z16 = 160mm/sec Z20 = 200mm/sec
Product Downloads
Related Products
Tags
Disclaimer
A fee will be charged for the additional customisation or preparation of operators and/or accessories at the time of order.
Prices shown are ex-GST and Plus Freight, you must add GST & Freight to applicable orders.
Global Access advises that all automation systems should have the appropriate safety devices to protect pedestrians and vehicles.
This is mandatory for some operators, this is listed in the notes for the applicable products.
Pricing DisclaimerProduct information and pricing is presented in good faith and believed to be correct at the time of publication, Global Access makes no representations or warranties as to the completeness or accuracy of the information.
Where a product is listed at an incorrect price due to typographical, photographic, or technical error, Global Access shall have the right to refuse or cancel any orders placed for product listed at the incorrect price. Global Access has no liability for any errors or omissions for the content on this website.